Если ошибок терминал не вернул, перезагружать не нужно. Проверим, что показывает NetworkManager Кали:
Best WiFi Adapter for Kali Linux
The all new Kali Linux 2022.2 was rolling out and we can simply use it as our primary operating system because of the non-root user. The main benefit of using Kali Linux as primary OS is we got the hardware support. Yes, we can do our all penetration testing jobs with this Kali Linux 2022, but to play with wireless networks or WiFi we need some special USB WiFi adapters in Kali.
Here we have listed some best USB Wireless adapters Kali Linux in 2021. These WiFi adapters are 100% compatible with Kali Linux and supports monitor mode and packet injection, which will help a lot in WiFi penetration testing.
Best WiFi Adapter for Kali Linux
We are using this USB WiFi adapter from the BackTrack days (before releasing Kali Linux) and still we consider it as one of the best. For it’s long range signals we can do our penetration testing jobs from a long distance.
Alfa AWUS036NH is plug and play and compatible with any brand 802.11g or 802.11n router using 2.4 GHz wavelength and supports multi-stream & MIMO (multiple input multiple output) with high speed transfer TX data rate up to 150 MBPS. It also comes with a clip which can be used to attach this adapter on a laptop lid.
- Chipset: Atheros AR 9271.
- Compatible with any brand 802.11b, 802.11g or 802.11n router using 2.4 Ghz wave-length.
- Includes a 5 dBi omni directional antenna as well as a 7 dbi panel antenna.
- Supports security protocols: 64/128-bit WEP, WPA, WPA2, TKIP, AES.
- Compatible with Kali Linux RPi with monitor mode and packet injection.
- High transmitter power of 28 dBm – for long-rang and high gain WiFi.
Package requirements
In order to install this package, you need to have a few things :
If you meet the requirements of the package, you can try installing it.
Kernels 2.6.24 or higher
note: the exact filename of the tarball depends on which version you have downloaded, substitute the example filename with the one corresponding to the file you downloaded
note: the next two steps are only required for compat-wireless versions before v3.3-rc1-2
Before compiling, take a look at “driver-select” down the page
Kernels 2.6.22 — 2.6.24
If you’re using an ancient kernel, currently lower than 2.6.24, you won’t have much success enabling aircrack-ng. There used to be a package called compat-wireless-old which is no longer supported. You could try and dig in to Orbit’s archives for older releases, be warned, the likelihood of you succeeding is very slim. Your best bet to enable compat-wireless, thus aircrack-ng, is to install a supported kernel version. An other convenient option is to utilize linux Live CD with preconfigured settings for easy aircrack-ng operation.
Driver Select
compat-wireless offers one very useful script, called driver-select, which allows you to save time when compiling your preferred driver. Currently not all drivers are available via driver-select but the most common ones are. Its useful if you install compat-wireless frequently or if you have one card on your computer. Enter the compat-wireless directory and issue:
to see all of the available drivers and options. An example of installing singular module would be
Refer to the linux-wireless driver-select page for more details.
«Устанавливаем неустановленное».
В принципе, все мои проблемные библиотеки лежат тут. Их можно скачать и скопировать в директорию /lib/firmware/i915/ and update with sudo update-initramfs -u -k all and sudo apt-get update -y . But I’ll take a path that anyone can use. We expand the list of repositories by adding three more sources to the official list:
deb http://deb.debian.org/debian buster main contrib non-free
deb http://deb.debian.org/debian-security/ buster/updates main contrib non-free
deb http://deb.debian.org/debian buster-updates main contrib non-free
sudo apt update sudo apt install apt-file sudo apt-file update
Check the error about missing modules after the system update command:
Wi-Fi does not work on Kali Linux: installation process.
An automated script appeared to install modules from Broadcom. We ask for help from the BroadcomInstaller2022 at Github. On the page, follow the simple instructions to install from the terminal. First, download from the source, navigate to the desired partition, grab the rights and run the installer .sh:
git clone https://github.com/jaykali/BroadcomInstaller2022 cd BroadcomInstaller2022 chmod +x Broadcom.sh bash Broadcom.sh
The commands didn’t show up in the pictures, sorry. The terminal will return the options in the running utility, from which we will select 1 to install the Wi-Fi driver. It will take some time. In the same terminal, you will probably have to agree to additional updates, confirming the choice of the Russian Д.
Probably the notebook will restart on its own. After the restart the icon with the wireless connection should appear where it is supposed to: in the upper right corner. I enter the password and use it.
Read More:
