If you are going to connect wired Internet from a router to a computer or laptop, then you have to pull the network cable to the room where the computer is installed.
How to connect a wifi router if you have wired Internet rostelecom?
If you have more than one computer, or you actively use the Internet from devices such as an e-book, video game system or smartphone, creating a wireless home network will be the best solution to save mobile traffic and, consequently, the family budget.
So in this article, we will look in detail at how to connect a wifi router if you have wired internet, and what settings you will need to do this.
We also recommend that you read the article How to install a wifi router yourselfIn this article you will learn how to choose the right location for your home router.
How to connect a wired router Rostelecom?
If you already have wired Internet, then first you need to determine the type of connection to the "world wide web" (i.e. what channel the signal from the provider comes to your home). Currently, the most common for wired Internet are cable connection over Ethernet lines and ADSL.
You can read more about the varieties of Internet connection in the article What kind of Internet to choose for a private home.
If you receive wired Internet via ADSL, then a detailed instruction on how to connect wifi router, is presented in the article router connection to ADSL modem ..
In general, the procedure for installing a wifi router is as follows:
- – disconnect your wired modem;
- – unplug the twisted-pair cable connecting the modem to your computer and plug it into the "Line in" or "Internet" port on your wifi router (thus connecting the router and modem);
- – reconnect the modem's power cord – it will blink when the connection is made;
- – allocate a socket for the router's power supply, connect the router to the mains and turn it on with the appropriate button. When the router establishes a connection to the modem, it will begin to distribute broadcast signals.
If you originally connected to the Internet via Ethernet line – it is sufficient to connect a network cable provided by your provider to the WAN socket of the new router, and then reconnect Connect the router to your computer with a cable.
How to connect a cable Internet via a router: configuring the router
Launch your Internet browser and enter the IP address of your router in the address bar (IP addresses can vary depending on the model, but usually it is 192.168.0.1, less often 192.168.1.1).
If everything has been done correctly, you will see an authorization window.
Now you have to enter your login and password to access the router settings (in standard configurations this is "admin", which you have to enter in both fields).
After authorization, you will see the control panel of your wifi router (depending on the router model, the appearance may be slightly different).
Go to the "Quick settings" tab and click "Next".
You have several options in front of you to connect to the Internet:
- – Autodetect – as the name implies, this connection automatically configures your router and is often used when there are no settings from your ISP.
- – PPPoE – selecting this item will open an additional window where you have to enter the password and login provided by your Internet provider.
There is wired Internet, how to connect wifi?
Now you need to configure the Wi Fi connection. To do this, go to the next tab and in the "Wireless mode" field, set the marker to "Enable".
In the "Wireless Network Name" field, enter the name you prefer, check the "WPA, Personal WPA2" box (this is the choice of security for your Wi-Fi connection) and enter password to connect your devices to the wireless network.
Then click on "Next", save your settings, restart your device and your connection is set up.
Read More:
